XCEU522 / XCEC522 · PRESCALER COUNTER

PRESCALER COUNTER

Description
Especifications

XCEU522 / XCEC522 counter with scale factor: direct reading in metres, litres or pieces, 1 or 2 presets and totaliser. 10 kHz.

Product type:	Digital preset counter with scale factor
Installation:	48 × 48 mm panel: 11-pin socket (U) or plug-in connectors (C)
Presets:	1 or 2
Inputs:	A, B and reset (Z) · NPN or PNP

Features

✓Scale factor (prescaler) with 2 integer digits and 4 decimals: converts pulses into metres, litres or pieces
✓Built-in totaliser
✓One or two presets, with an output for each
✓Up or down counting up to 9,999,999 at 10 kHz, with programmable decimal point
✓NPN or PNP inputs and 12 VDC 50 mA supply for the sensor
✓IP65 front; U version with 11-pin socket or C version with connectors

Supply

24 … 230 VAC · 12/24 VDC

Outputs

SPDT + SPST · 8 A

Count

9,999,999 · 10 kHz

Format

48 × 48 · IP65

Documentation

Datasheet (PDF in Spanish)Request information Custom unit

How it works

1With the unit de-energised, the function and input polarity are selected with the side DIP switch.
2With PROG and RUN together the scale factor, decimal point and, if the mode requires it, the output times are programmed; with PROG, the presets.
3When the count reaches a preset its output (F or L) switches on, latched or timed according to the DIP switch.
4Each pulse is multiplied by the scale factor: the display shows the quantity directly (m, l, pieces) and the count can go up or down.

You may also be interested in

XCEU502Double preset, batch counter XCEU6021 preset, two-colour display XLC4HReplacement for LC counters SCEU029Edge counter with scale factor

Frequently asked questions

Does it need a power supply for the sensor?

No. It has a 12 VDC 50 mA supply on terminals 1 (+) and 3 (−) of the XCEU522; if the load is exceeded OVERLOAD is shown.

What is the scale factor for?

To read directly in the unit you need: for example, metres of material or litres from a flow meter, instead of pulses.

What is the difference between XCEU522 and XCEC522?

The same functions: the XCEU522 connects on an 11-pin socket and the XCEC522 has plug-in connectors.

General information

References	XCEU522 (11-pin socket) · XCEC522 (plug-in connectors) (24 / 48 / 110 / 230 VAC · 12 / 24 VDC)
Series	X · 48 × 48 mm panel
Product type	Digital preset counter with scale factor

Electrical specifications

Supply	24 / 48 / 110 / 230 VAC · 12 / 24 VDC
Consumption	2.3 VA
Outputs	1 x SPDT + 1 x SPST · 8A 250 VAC
Sensor supply	12 VDC 50 mA

Count

Capacity	Up to 9,999,999
Speed	Up to 10 kHz
Presets	1 or 2
Scale factor	2 integer digits and 4 decimals
Totaliser	Built in
Direction	Up or down
Inputs	A, B and reset (Z) · NPN or PNP by DIP switch
Reset	To zero or to preset
Output L	Latched or timed

Housing and mounting

Format	48 × 48 mm
Panel cut-out	45 × 45 mm
Fixing	Snap-in bracket
Front	IP65
Material	Grey polycarbonate UL94-V0
Weight	≈ 170 g

Environmental conditions

Operating temperature	−10 to +55 °C
Storage temperature	−25 to +85 °C

Standards and certifications

Compliance

CE · 2014/30/EU · 2014/35/EU

Accessories

ZB11-0 · 11-pin socket for DIN rail · PG11 · 11-pin socket with rear screw · TBEU1E · 11-pin in-line socket · MA7248 · frame from 72 × 72 to 48 × 48 mm · MA9648 · frame from 96 × 96 to 48 × 48 mm · MA96D48 · frame from 96 × 48 to 48 × 48 mm

Wiring: function of each terminal

Function	XCEU522 (11-pin)	XCEC522 (connectors)
Supply	2 - 10	2 - 3
Input B	5	12
Input A	6	13
Reset input (Z)	7	11
Output L	8 - 9 - 11	5 - 6 - 7
Output F	4 - 11	15 - 16
Sensor supply	1 (+) - 3 (−)	1 - 9