XCT83R · TEMPERATURE REGULATOR WITH INCORPORATED TIMER (THERMOCOUPLE PROBE)

TEMPERATURE REGULATOR WITH INCORPORATED TIMER (THERMOCOUPLE PROBE)

Description
Especifications

XCT83R temperature controller with built-in timer for J, T or K thermocouple: PID with autotuning or ON-OFF, 2 x SPST 5A. 48 × 48, IP65.

Product type:	Temperature controller with timer
Installation:	48 × 48 mm panel, 11-pin socket
Control:	Full PID with autotuning or ON-OFF
Timer:	Interval or on-delay, up to 999 in 4 time bases

Features

✓Temperature controller and timer in one unit
✓Simultaneous display of temperature and time
✓Full PID with 2 autotuning options, or ON-OFF with hysteresis
✓Timer started by an external contact or when the setpoint temperature is reached
✓J, T or K thermocouple, in °C or °F
✓Parameter lock by DIP and by menu
✓IP65 front · 48 × 48 mm format with 11-pin socket

Supply

24…230 VAC · 12/24 VDC

Outputs

2 x SPST 5A

Sensor

J · T · K thermocouple

Format

48 × 48 panel · IP65

Documentation

Datasheet (PDF in Spanish)Request information Custom unit

How it works

1With the unit powered off, the control mode (PID or ON-OFF), the timer function, the start and the time base are selected by DIP.
2PROG and the keys set the temperature setpoint and the time preset (up to 999).
3The control output (4 - 5) controls the temperature; autotuning calculates P, I and D on the setpoint or 10 % below it.
4The timer starts with the external contact (6 - 8) or when the setpoint is reached, and the timed output (7 - 9) acts.

You may also be interested in

XCT82RMulti-sensor PID XCT55BxxPID controller for J or K thermocouple XCT65BxxPID controller for Pt100 XTDU302Reference digital timer

Frequently asked questions

How does the timer start?

Depending on the DIP: when an external contact closes on terminals 6 - 8, or when the temperature reaches the setpoint.

Which sensors does it accept?

J (−99.9 to 900 °C), T (−199.9 to 400 °C) and K (−200 to 1300 °C) thermocouples.

Which times can be programmed?

A preset of up to 999 with a base of 0.1 s, 0.1 min, 0.01 h or 0.1 h, as interval or on-delay.

General information

Reference	XCT83R (24 / 48 / 110 / 230 VAC · 12 / 24 VDC)
Series	X · 48 × 48 mm panel
Product type	Temperature controller with built-in timer

Electrical specifications

Supply	24 / 48 / 110 / 230 VAC · 12 / 24 VDC
Consumption	2.3 VA
Outputs	2 x SPST 5A 250 VAC: control output and timed output

Sensor and control

Sensors	J thermocouple: −99.9 to 900 °C · T: −199.9 to 400 °C · K: −200 to 1300 °C
Unit	°C or °F (SENS parameter)
Modes	PID (DIP 7) or ON-OFF
Autotuning	0 off · 1 on the setpoint · 10 at 10 % below
Proportional band (P)	0.1 to 600 °C
Integral (I) and derivative (D)	0 to 3600 s
Cycle time (CP)	1 to 99 s
ON-OFF hysteresis	Minimum 0.1
Other parameters	Setpoint limits (US / LS), SHIFT, RET, decimal point and lock (LOC)

Timer

Functions	Interval on start · on-delay
Start	By external contact or by temperature
Preset	Up to 999
Time bases	0.1 s · 0.1 min · 0.01 h · 0.1 h

Indications

Display	Temperature and time together
Errors	SErr (sensor) · tErr (ambient temperature)

Housing and mounting

Format	48 × 48 mm
Panel cut-out	45 × 45 mm
Fixing	Snap-in bracket
Connection	11-pin socket
Front protection	IP65
Material	Grey polycarbonate UL94-V0
Weight	≈ 170 g

Environmental conditions

Operating temperature	−10 to +55 °C
Storage temperature	−25 to +85 °C

Standards and certifications

Compliance

CE · 2014/35/EU · 2014/30/EU

Accessories

ZB11-0 · 11-pin socket for DIN rail · PG11 · 11-pin socket with rear screw · TBEU1E · 11-pin in-line socket · MA7248 · frame from 72 × 72 to 48 × 48 mm · MA9648 · frame from 96 × 96 to 48 × 48 mm · MA96D48 · frame from 96 × 48 to 48 × 48 mm