Counting >

SCR 007 · PULSE COUNTER

Customised unit, please contact the sales department. SCR007 counter of production metres, speed (m/h) and hours. 48 × 48, IP65.

Product type:	Production metre counter (customised unit)
Orders:	Contact the sales department
Installation:	48 × 48 mm panel, plug-in terminals
Readings:	Metres, speed (m/h), production time and hours

Features

Supply

24 VAC

Outputs

2 x SPDT 8A

Counting

PNP · up to 50 Hz

Format

48 × 48 panel · IP65

1The metre preset (CM), the rope diameter (DR) and the production time (Tim.P) are programmed.
2The RUN key steps through the readings: CM, m/h, Tim.P, Tim.T and Hr.
3The partial metre counter counts down from the preset and the total counts up.
4When it reaches zero, the RESET key or the reset input sets the counter to zero.

How is it ordered?

It is a customised unit: please contact the sales department.

What does it measure?

Production metres, speed in metres per hour, production time and operating hours.

Which inputs does it have?

One count input, one reset input and one programming lock input, with PNP polarity.

Reference	SCR007 (24 VAC)
Series	S · 48 × 48 mm panel
Product type	Production metre counter
Orders	Customised unit: contact the sales department

Supply	24 VAC
Auxiliary voltage	12 VDC · 50 mA
Consumption	2.3 VA
Outputs	2 x SPDT 8A 250 VAC (main and auxiliary), latched

Inputs	Count, reset and programming lock
Polarity	PNP
Speed	Up to 50 Hz
Counters	Partial counting down from the preset · total counting up
Times	Partial decreasing · total increasing
Parameters	CM metre preset · DR rope diameter · Tim.P time preset