Electrical control and measurements - Current relays >

ZCIx4xx · MINIMUM CURRENT INTENSITY

INTENSITY CONTROL FOR MINIMUM CURRENT

Description
Especifications

ZCIx4xx minimum current control relay with built-in toroid: 5, 10 and 20 A ranges, block or enable control input.

Product type:	Minimum current control relay
Installation:	DIN rail, 1 module
Measurement:	Built-in toroid: one phase is passed through the hole
Application:	Motor without load or broken belt; in pumps, lack of water

Features

✓Switches the output off when consumption drops below the minimum: detects a motor without load
✓Built-in toroid: no external current transformer
✓0 to 5, 0 to 10 and 0 to 20 A ranges depending on reference
✓Front potentiometer setting
✓Versions without control input (V), with block (B) or with enable (P)
✓Detection and output status LEDs
✓Only 17.5 mm of DIN rail

Supply

230 VAC or 24 VAC/VDC

Output

1 x SPDT 8A

Range

0–5 · 0–10 · 0–20 A

Format

1 DIN module · 17.5 mm

Documentation

Datasheet (PDF in Spanish)Request information Custom unit

How it works

1One phase of the supply of the system to be monitored is passed through the hole on the side of the unit.
2With no current, the output is off and the minimum LED is on.
3When the current reaches the value set with the potentiometer, the LED goes off and the output switches on.
4If the current drops below the set value, the output switches off.

You may also be interested in

ZCIx3xxMaximum and minimum current ZCIx5xxMaximum current MCIV02Current control with display ZCFF01Phase sequence and failure

Frequently asked questions

Does it need a current transformer?

No. The toroid is built in: just pass one phase through the hole on the side.

How is the reference read?

ZCI + control input (V none, B block, P enable) + function (4: minimum) + range (05, 10 or 20 A). For example, ZCIB410: with block, 0 to 10 A.

Which supply does it use?

230 VAC or 24 VAC/VDC. It must be stated in the order.

General information

Reference	ZCIx4xx (230 VAC or 24 VAC/VDC)
No control input (V)	ZCIV405 · ZCIV410 · ZCIV420
Block (B)	ZCIB405 · ZCIB410 · ZCIB420
Enable (P)	ZCIP405 · ZCIP410 · ZCIP420
Series	Z · DIN rail
Function	4 · Minimum

Electrical specifications

Supply	230 VAC or 24 VAC/VDC (state in the order)
Consumption	1.7 W
Output	1 x SPDT 8A 250 VAC

Measurement and setting

Measurement	Built-in toroid
Ranges	0 – 5 A · 0 – 10 A · 0 – 20 A
Setting	Minimum setting with front potentiometer
Control input	Block or enable, depending on model

Indications

LEDs	Detection and output status

Housing and mounting

Format	1 DIN module · 17.5 × 90 × 58.5 mm
Fixing	35 mm rail (EN 60715)
Material	Grey polyamide PA6 UL94-HB
Weight	≈ 72 g

Environmental conditions

Operating temperature	−10 to +55 °C
Storage temperature	−25 to +85 °C

Standards and certifications

Compliance

CE · 2014/35/EU · 2014/30/EU

Wiring: function of each terminal

Terminals	Function
1 - 3	Supply
2 - 3	Control input
4 - 5 - 6	Changeover output

The wiring diagram can be enlarged in the images below the photo.

Request information

Back

ZCIx4xx · MINIMUM CURRENT INTENSITY

INTENSITY CONTROL FOR MINIMUM CURRENT

Features

Documentation

How it works

You may also be interested in

Frequently asked questions

General information

Electrical specifications

Measurement and setting

Indications

Housing and mounting

Environmental conditions

Standards and certifications

Wiring: function of each terminal

Related products

YFA480 · 10W POWER SUPPLY

YSP002 · 2-OUTPUT SEQUENCER · FIXED PROGRAM

MA96D48 · ADAPTER FRAME 96×48 TO 48×48

XVE485 · PULSE DISPLAY WITH COMMUNICATION

XZM001 · MULTISCALE MULTIFUNCTION TIMER

MSP400 · 4-OUTPUT PROGRAMMER WITH DISPLAY