MCT401 · THERMOSTAT WITH NTC PROBE

MCT401 digital thermostat with NTC sensor included: heating control from 0 to 50 °C in 0.5 °C steps, 1 x SPDT 16A and ON/OFF button.

Features

• ✓Heating temperature control with NTC sensor
• ✓NTC 10 kΩ B3950 IP68 sensor with 3 m cable included
• ✓Setpoint in 0.5 °C steps with the ▲ and ▼ keys
• ✓Output 1 x SPDT 16A 250 VAC
• ✓ON/OFF start button: when off, only the OFF indicator stays lit, to save energy
• ✓Sensor break or short-circuit indication: heating is switched off

Documentation

How it works

1. 1When the unit is powered, the OFF indicator lights up: it is powered but switched off.
2. 2The ON/OFF button starts it and the display shows the programmed temperature.
3. 3The setpoint is set with ▲ and ▼ in 0.5 °C steps. Below the setpoint heating is on (red LED); above it, heating is off (green LED).
4. 4If the sensor fails, heating is switched off, the NTC indicator lights up and an error message is shown.

You may also be interested in

Frequently asked questions