Temperature - Digitals >

XCT82R · MULTIFUNCTION TEMPERATURE REGULATOR WITH 2 ALARMS



MULTIFUNCTION TEMPERATURE REGULATOR WITH 2 ALARMS



XCT82R multi-sensor PID temperature controller: Pt100, J, T or K thermocouple in one unit, autotuning, 2 alarms and IP65 front. 48 × 48.

Product type: Multi-sensor digital PID temperature controller
Installation: 48 × 48 mm panel, 11-pin socket
Control: Full PID with autotuning or ON-OFF
Sensors: Pt100 (2 or 3 wires), J, T or K thermocouple

Features

  • ✓One model in stock for any sensor: Pt100, J, T or K
  • ✓Input type configurable with DIP switches
  • ✓Full PID with two autotuning options: on the setpoint or 10 % below it
  • ✓2 configurable alarms: 2 x SPST 5A
  • ✓Programmable setpoint ramp
  • ✓Setpoint and parameter lock
  • ✓Two-colour backlit LCD display with 4 + 4 digits
  • ✓IP65 front · 48 × 48 mm format on 11-pin socket
Supply
24 / 48 / 110 / 230 VAC
Outputs
1 x SPST 8A + 2 x SPST 5A
Sensor
Pt100 · J · T · K
Format
48 × 48 panel · IP65

How it works

  1. 1The sensor (Pt100, J, T or K) and the unit are selected with the side DIP switches and the SENS parameter.
  2. 2The setpoint is set with the keys within the US and LS limits; setpoint and alarms are adjusted with direct keys.
  3. 3PID or ON-OFF is selected. In PID, autotuning calculates P, I and D on the setpoint or 10 % below it.
  4. 4If required, the SRR ramp raises the setpoint gradually, in degrees per minute.

Frequently asked questions

Which sensors does it accept?

2- or 3-wire Pt100 and J, T and K thermocouples. The input is configured with the DIP switches and the SENS parameter.

What is the range of each sensor?

Pt100 from −199.9 to 700 °C, J thermocouple from −99.9 to 900 °C, T from −199.9 to 400 °C and K from −200 to 1300 °C.

Can programming be locked?

Yes. The setpoint and the parameters can be locked.


General information

Reference XCT82R  (24 / 48 / 110 / 230 VAC)
Replaces XCT80R (no alarms) · XCT81R (1 alarm)
Series X · 48 × 48 mm panel
Product type Multi-sensor digital PID temperature controller

Electrical specifications

Supply 24 / 48 / 110 / 230 VAC
Consumption 3.5 VA
Control output 1 x SPST 8A
Alarm outputs 2 x SPST 5A

Sensors and ranges

Pt100 (IEC), 2 or 3 wires −199.9 to 700 °C
J thermocouple −99.9 to 900 °C
T thermocouple −199.9 to 400 °C
K thermocouple −200 to 1300 °C
Sensor selection DIP switches and SENS parameter
Sensor break Detection by maximum and minimum value

Control

Modes Full PID or ON-OFF
Autotuning On the setpoint or 10 % below it
Setpoint ramp (SRR) In degrees per minute
Alarms 2 configurable
Memory EEPROM, maintenance-free

Indications and programming

Display Two-colour backlit LCD, 4 + 4 digits
Locks Setpoint and parameters

Housing and mounting

Format 48 × 48 mm
Panel cut-out 45 × 45 mm
Fixing Snap-in bracket
Connection 11-pin socket
Front protection IP65
Material Grey polycarbonate UL94-V0
Weight ≈ 210 g

Environmental conditions

Operating temperature −10 to +55 °C
Relative humidity < 85 %

Standards and certifications

Compliance CE

Accessories

ZB11-0 · 11-pin socket for DIN rail  ·  PG11 · 11-pin socket with rear screw  ·  TBEU1E · 11-pin in-line socket  ·  MA7248 · frame from 72 × 72 to 48 × 48 mm  ·  MA9648 · frame from 96 × 96 to 48 × 48 mm  ·  MA96D48 · frame from 96 × 48 to 48 × 48 mm

Wiring: function of each terminal

Terminals Function
10 - 11 Supply
1 - 2 Thermocouple input
1 - 2 - 3 Pt100 input
4 - 5 - 6 Control output
7 - 8 Alarm 1
7 - 9 Alarm 2

The wiring diagram can be enlarged in the images below the photo.





Automatismos.com