VCT010 · TEMPERATURE CONVERTER FOR NTC PROBE

TEMPERATURE CONVERTER FOR NTC PROBE

Description
Especifications

VCT010 temperature converter for NTC 10 kΩ sensor: 0 – 10 V output from −15 to 85 °C, sensor error LED, 22.5 mm DIN housing.

Product type:	Temperature converter
Installation:	DIN rail, 22.5 mm housing
Input:	NTC 10 kΩ sensor (B25/85 = 3977 K)
Output:	Analogue 0 – 10 V

Features

✓Converts the temperature of an NTC sensor into a 0 – 10 V signal for PLCs, drives and recorders
✓Range from −15 to 85 °C: 0 V at −15 °C or below and 10 V at 85 °C or above
✓Error LED if the sensor breaks or short-circuits
✓Power LED
✓22.5 mm housing for DIN rail

Supply

100 – 240 VAC

Output

0 – 10 V

Sensor

NTC 10 kΩ

Format

22.5 mm · DIN rail

Documentation

Datasheet (PDF in Spanish)Request information Custom unit

How it works

1The NTC sensor is connected to the input (terminals 6 - 8) and the PLC analogue input to the output (terminals 3 - 4).
2The converter gives a voltage from 0 to 10 V depending on the temperature read.
3At −15 °C or below the output is 0 V; at 85 °C or above, 10 V.
4If the sensor breaks or short-circuits, the error LED on the front lights up.

You may also be interested in

PNTC01Panel NTC thermostat MCT402NTC thermostat with 2 alarms XVRU250Panel Pt100 thermometer XCT100Analogue Pt100 controller

Frequently asked questions

Which sensor does it need?

An NTC 10 kΩ sensor with B25/85 = 3977 K.

Which output does it give?

A voltage from 0 to 10 V: 0 V at −15 °C or below and 10 V at 85 °C or above.

How does it signal a sensor fault?

If the sensor breaks or short-circuits, the error LED on the front lights up.

General information

Reference	VCT010 (100 – 240 VAC)
Series	V · 22.5 mm DIN rail module
Product type	Temperature converter

Electrical specifications

Supply	100 – 240 VAC
Consumption	1.7 W
Output	0 – 10 V

Sensor and measurement

Sensor	NTC 10 kΩ (B25/85 = 3977 K)
Range	−15 … 85 °C
Sensor failure	Error LED for break or short circuit

Indications

LEDs	Power and sensor error

Housing and mounting

Format	22.5 × 90 × 58.5 mm
Fixing	DIN rail
Material	Grey polyamide PA6 UL94-HB
Weight	≈ 80 g

Environmental conditions

Operating temperature	−10 to +55 °C
Storage temperature	−25 to +85 °C

Standards and certifications

Compliance

CE · 2014/35/EU · 2014/30/EU

Wiring: function of each terminal

Terminals	Function
1 - 2	Supply
3 - 4	0 - 10 V output
6 - 8	NTC sensor input

The wiring diagram can be enlarged in the images below the photo.

Request information

Back

VCT010 · TEMPERATURE CONVERTER FOR NTC PROBE

TEMPERATURE CONVERTER FOR NTC PROBE

Features

Documentation

How it works

You may also be interested in

Frequently asked questions

General information

Electrical specifications

Sensor and measurement

Indications

Housing and mounting

Environmental conditions

Standards and certifications

Wiring: function of each terminal

Related products

ZCIx3xx · MAXIMUM AND MINIMUM CURRENT INTENSITY

XMD12M · MECHANICAL TIMER REPLACEMENT · NORMAL CLUTCH

ZB11-0 · 11-PIN SOCKET FOR DIN RAIL

XCEU522 / XCEC522 · PRESCALER COUNTER

MTDS04 · 4-OUTPUT SEQUENCER, MULTIPLE TIMER

VCTJx0 · J THERMOCOUPLE TEMPERATURE CONVERTER TO 0-10 V / 4-20 mA