Timing - Timers >

XTDU102 · MULTIFUNCTION + CYCLICAL ASYMMETRIC



DIGITAL TIMER



XTDU102 long-range digital multifunction timer: 8 modes, from 0.01 s to 9999 h, 4 optocoupled inputs and programming control. 48 × 48.

Product type: Long-range digital multifunction timer
Installation: 48 × 48 mm panel, 11-pin socket
Functions: 8 (A to H), including asymmetrical cyclic and double timing
Control inputs: 4 optocoupled: start, stop, reset and programming control

Features

  • ✓8 working modes: delays, intervals, asymmetrical cyclic and double timing
  • ✓Multi-range from 0.01 s to 9999 h: very long times with precision
  • ✓With or without elapsed-time memory after a power cut
  • ✓4 optocoupled control inputs
  • ✓Programming control input: the setting stays protected
  • ✓In two-time functions the first (F) and second (L) times are programmed separately
  • ✓IP65 front and transformer supply
Supply
24 … 230 VAC · 12/24 VDC
Output
1 x SPDT 8A
Times
0.01 s … 9999 h
Format
48 × 48 · IP65

How it works

  1. 1With the unit de-energised, the function and memory are selected with the side DIP switch.
  2. 2The time is programmed from the front, choosing the range (hours, minutes or seconds) and decimals.
  3. 3Timing starts when the start contact closes, or on power-up if it is already closed.
  4. 4With memory, after a power cut the cycle resumes from the position it was in.

Frequently asked questions

What is the maximum time?

9999 hours, with a minimum resolution of 0.01 s in the short ranges.

Can the setting be protected?

Yes, with the programming control input (terminal 11).

How are two-time functions programmed?

The first time (F) appears first and, pressing again, the second (L).


General information

Reference XTDU102  (24 / 48 / 110 / 230 VAC · 12 / 24 VDC)
Series X · 48 × 48 mm panel
Product type Long-range digital multifunction timer

Electrical specifications

Supply 24 / 48 / 110 / 230 VAC · 12 / 24 VDC
Supply type Transformer (VAC)
Output 1 x SPDT 8A
Control inputs 4 optocoupled: start · count stop · reset · programming control

Times and functions

Range 0.01 s to 9999 h
Functions 8 (A to H), by side DIP switch
Memory after power cut Selectable

Indications

Display Time and setpoint · HRS / MIN / SEG range indicators
LED Output on

Housing and mounting

Format 48 × 48 mm
Connection 11-pin socket
Front IP65

Working functions

Function Description
A On-delay
B Interval on energising
C Interval on de-energising of the auxiliary contact
D On-delay + off-delay
E Asymmetrical cyclic
F Inverted asymmetrical cyclic
G Double timing
H Inverted double timing

Accessories

ZB11-0 · 11-pin socket for DIN rail  ·  PG11 · 11-pin socket with rear screw  ·  TBEU1E · 11-pin in-line socket  ·  MA7248 · frame from 72 × 72 to 48 × 48 mm  ·  MA9648 · frame from 96 × 96 to 48 × 48 mm  ·  MA96D48 · frame from 96 × 48 to 48 × 48 mm

Wiring: function of each terminal

Terminal Function
2 - 10 Supply
5 Start
6 Count stop
7 Reset
11 Programming control
1 - 3 - 4 Changeover output

The detailed diagram is in the datasheet.

www.google.es




Automatismos.com