XVEU102 · TACHOMETER WITH 2 PRESETS AND PRESCALER

TACHOMETER WITH 2 PRESETS

Description
Especifications

XVEU102 double preset tachometer: reading in rpm or m/min with scale factor and two setpoints with output. 48 × 48, IP65.

Product type:	Double preset tachometer
Installation:	48 × 48 mm panel, 11-pin socket
Reading:	rpm or m/min, with scale factor
Alarms:	Minimum and maximum with output

Features

✓Speed reading in rpm or m/min
✓Scale factor with 2 integer digits and 4 decimals and programmable decimal point
✓Two presets (H and L) with output: minimum and maximum alarm
✓Each output is set to OFF, on below or on above the preset
✓Selectable gate time: 0.2 · 1 · 2 · 5 · 10 s
✓NPN or PNP inputs and sensor supply
✓IP65 front and programming lock

Supply

24 … 230 VAC · 12/24 VDC

Outputs

2 x SPST 8A

Reading

rpm or m/min

Format

48 × 48 · IP65

Documentation

Datasheet (PDF in Spanish)Request information Custom unit

How it works

1The sensor sends pulses to the input; the unit counts them during the chosen gate time.
2With the scale factor, the display shows the speed directly (rpm or another unit).
3Each output compares the average speed with its preset: it switches on below (minimum) or above (maximum), as programmed.
4With PROG and RUN together the scale factor, decimal point, gate time and output states are programmed.

You may also be interested in

XVEU050rpm speed display XVEU060Pulse totaliser XCEU522Counter with scale factor MCIV02Digital current control

Frequently asked questions

How do I read in m/min?

By programming the right gate time and scale factor: the display shows metres per minute directly.

Can it warn if the machine runs too slow or too fast?

Yes. Each of the two outputs is programmed to switch on below or above its preset.

Does it need a power supply for the sensor?

No. It has a built-in sensor power supply and accepts NPN or PNP inputs.

General information

Reference	XVEU102 (24 / 48 / 110 / 230 VAC · 12 / 24 VDC)
Series	X · 48 × 48 mm panel
Product type	Double preset tachometer

Electrical specifications

Supply	24 / 48 / 110 / 230 VAC · 12 / 24 VDC
Outputs	2 x SPST 8A
Sensor supply	Built in
Inputs	NPN or PNP by DIP switch

Reading and functions

Capacity	Up to 9,999,999
Scale factor	2 integer digits and 4 decimals
Gate time	0.2 · 1 · 2 · 5 · 10 s
Presets	2 (H and L), with output
State of each output	OFF · on below · on above
Programming lock	Yes

Housing and mounting

Format	48 × 48 mm
Connection	11-pin socket
Front	IP65

Accessories

ZB11-0 · 11-pin socket for DIN rail · PG11 · 11-pin socket with rear screw · TBEU1E · 11-pin in-line socket · MA7248 · frame from 72 × 72 to 48 × 48 mm · MA9648 · frame from 96 × 96 to 48 × 48 mm · MA96D48 · frame from 96 × 48 to 48 × 48 mm